Product Highlights

AODELAN PEBBLE Wireless Shutter Remote consists of a transmitter and receiver.

The transmitter can control the receiver wirelessly to perform autofocus, single shot, delayed release and continuous release. (the receiver no need to occupy the camera hot shoe).

The receiver can also be used as a wired shutter remote to achieve autofocus, single shot, and continuous release.

The receiver can be controlled by up to 100 transmitters by setting the smart code. (Note:Turn on the receiver before using).

1. Reduce camera shake

Use the AODELAN PEBBLE wireless remote shutter release to reduce camera shake and take clearer photos.

In single shoting mode. Press the shutter button on the transmitter to trigger the camera.(Half press to auto-focus, fully press to take photo)

2. Continuous shooting

a. Set the camera to continuous shot mode.

b. Press and hold the shutter button on transmitter until the indicator turns off, and then let go off the button. The camera will perform continuous shooting.

c. To end the continuous shooting, press the shutter button on transmitter.

3. 2 seconds delay shooting

a. Put camera in Single shooting mode;

b. Press the 2s delay button on the transmitter to trigger the camera.

4. Bulb shooting

a. Set the camera to BULB mode.

b. Keeping press the shutter button on transmitter for seconds, and then let go off the button. The camera will perform BULB shooting.

c. To end the exposure time, press the shutter button on transmitter.

Specification:

Transmitter:

Type: 2.4GHz wireless remote system

Transmission power: 4dBm

Work voltage: 1piece CR2032 (button battery)

Current: sleep time 10uA ,stand-by time 10mA, work 15 mA

Size: L 66.8 x W 35.8 x H 13.2 mm

Weight: 12.8 g without battery

Receiver:

Type: 2.4GHz

Work voltage: 2 x AAA battery (not included)

Current: sleep time 10uA, stand-by time30mA, work 35 mA

Size: L 89.6 x W 41.0 * H 32.6 mm

Weight: 36.5g (without battery )

Transmitter distance: 60M+

Package includes:

1 x Transmitter (with built-in battery)

1 x Receiver (without buttery in the package)

1 x Shutter Release Cable

2 x Lanyards

Note: please select right model according to your camera

Compatibility:

For Fujifilm X-H2, X-H2S, X-H1, GFX 50S II, GFX 50S, GFX 50R, GFX 100S II, GFX 100S, GFX100, X-T5, X-T4, X-T3, X-T2, X-T1, X-T100, X-T30 III, X-T30 II, X-T30, X-T20, X-A7, X-A5, X-E2, X-E1, X100V, X100VI, X30, XF10, X-Pro3,